21 Series Bitampo
Two component pad printing ink, specially suited to print on “difficult substrates” such as metals, glass, ceramics, wood and enamels.
Description
Features
Applications
Diluents
Catalization
Two component pad printing ink, specially suited to print on “difficult substrates” such as metals, glass, ceramics, wood and enamels.
- Specially suited to print on “difficult substrates” such as metals, glass, ceramics, wood and enamels.
- 21 SERIES wets very well the pad, at the time it also discharges very well on the substrate.
- The dried film of the 21 SERIES:
- – Has great chemical resistance
- – Great adhesion on the substrate
- – Ink with high opacity.
- Finish: Gloss
- Resistance varies according to the chosen color, see color chart.
Metal, glass, ceramics, acetal pens/lighters, polyamides, treated polyethylene and/or polypropylene, woods, etc.
D-100 as fast and D-400 as normal to slow. Its adequate mixture gives a good behaviour in the inking unit. When dried to the air, it dries in a few minutes if the temperature of the factory is abobe 20ºC and there is good ventilation. When dried by oven, at 80ºC, it dries in about 2-3 minutes. In any case, ovening is very important to assure a good polymerization.
Add to the ink HARDENER-118 at 7-14%, depending on the material which is going to be printed.