33 Series Multiplast

• 33 SERIES leaves in all these materials a thin, hard and well adhered film, with high chemical resistance, and that with the selection of the adequate references, it can be employed for exterior use.
• It must be highlighted that it leaves no residual odour.
• Finish: Gloss.
• Presentation: Only viscosity needs to be adjusted, depending on the job, factory temperature and impression speed.

sheets and pieces of PVC, ABS, SAN, polycarbonates, metacrylates, treated polyesters, PET, etc..

D-200 as fast to normal and D-696 as normal to slow. Itsadequate mixture gives a good behaviour in the screen and short drying times, between 5 and 20 minutes when dried to the air, depending on the material and the job, and in seconds when passes through a tunnel.

Emulsion with ARGAZOL-E (easy decoating) or ARGAZOL-UV (high performance and definition) with meshes from 90 to 130 meshes/cm.